Reduction - 1.1/2" BSP x 1/2" BSP female - WD seal
Thread reducer for adapting between two Whitworth parallel pipe thread interfaces in a hydraulic connection. The adapter provides an external BSPP thread G 1.1/2 on one side and an internal BSPP thread G 1/2 on the other, allowing a reduction in thread size between ports or fittings.
Sealing is made with a profile sealing ring in NBR. The body is zinc-nickel plated and is rated for a maximum working pressure of 315 bar, with an operating temperature range of -35 to +100 °C.
Typical Applications
- Reducing thread size between BSPP ports and hydraulic fittings
- Hydraulic pipework and component connections where a G 1.1/2 port must connect to a G 1/2 interface
Partnumber:
RI-112-12ED
Package size:
10 pcs
Min. order quantity is:
1 pcs
Diameter rör
25 mm
Gänga inv.
G 1/2 BSP
Gänga utv.
G 1.1/2 BSP
L1
36 mm
L2
14,5 mm
Längd
36 mm
Modell kod
FI-RED-R1-1/2-WD-R1/2-B-W3
Märke namn
Stauff
Packningsmaterial
NBR
REACH compliant
Yes
RoHs compliant
Yes
Rostbeständighet
1200 hours salt spray DIN EN ISO 9227
S1
55 mm
Sexkant
55 mm
Säkerhetsfaktor
4
Temperatur max.
+100 °C
Temperatur min.
-35 °C
Thread T1
G 1.1/2 BSP
Thread T2
G 1/2 BSP
Tillverkningsmaterial
Steel
Totallängd
60 mm
Tryck max.
315 bar
Typ
Short
Vinkel
0 °
Ytskiktbehandling
Zinc-Nickel plated
i
22 mm
Package size
10 pcs
Barcode
197024
Gross weight
0,47 Kg
Net weight
0,47 Kg
Country of origin
DEU
Intrastat code
73071110
Thread reducer for adapting between two Whitworth parallel pipe thread interfaces in a hydraulic connection. The adapter provides an external BSPP thread G 1.1/2 on one side and an internal BSPP thread G 1/2 on the other, allowing a reduction in thread size between ports or fittings.
Sealing is made with a profile sealing ring in NBR. The body is zinc-nickel plated and is rated for a maximum working pressure of 315 bar, with an operating temperature range of -35 to +100 °C.
Typical Applications
- Reducing thread size between BSPP ports and hydraulic fittings
- Hydraulic pipework and component connections where a G 1.1/2 port must connect to a G 1/2 interface
Note: Opening 3D files requires a program that supports the file format
Copyright © 2026 HydraSpecma