Tryck & tempsensor PT

The CAN Pressure / Temperature Sensor-PPC-CAN-PT-400 are specially designed for use with the CAN Hydraulic Testers. This sensor is using the CANopen protocol to transfer the measurement values to the CAN Hydraulic Testers. Most technical details are the same as with the Pressure / Temperature Sensor-PPC-04/12-PT. The CAN sensor is able to measure and display temperatures on the CAN Hydraulic Testers.

 

Due the sturdy Stainless-Steel design, the quick response time (< 1 ms) and the high accuracy (±0,25% FS* typ.) with automatic sensor recognition, the pressure / temperature sensor is a reliable and flexible solution for the CAN Hydraulic Tester. The status of the sensor is indicated via LED.

 

Connecting the CAN Pressure / Temperature Sensor to the CAN Hydraulic Tester a CAN Connection Cable and a CAN Terminating Resistor is needed.

 

Partnumber:
PPC-CAN-PT-400

Package size:
1 st

Min. order quantity is:
1 st
Brand Name
Stauff

Material
Stainless steel

Pressure Measurement Bar
0-400 Bar

Pressure burst min.
1200 bar

Pressure max.
800 bar

Sensor type
CAN

Temperature ambient max.
+85 °C

Temperature ambient min.
-25 °C

Temperature max.
+105 °C

Temperature min.
-25 °C

Thread
G 1/2 BSP
Förpackningsstorlek
1 st

Streckkod
356930

Bruttovikt
Kg

Nettovikt
Kg

Ursprungsland
deu

The CAN Pressure / Temperature Sensor-PPC-CAN-PT-400 are specially designed for use with the CAN Hydraulic Testers. This sensor is using the CANopen protocol to transfer the measurement values to the CAN Hydraulic Testers. Most technical details are the same as with the Pressure / Temperature Sensor-PPC-04/12-PT. The CAN sensor is able to measure and display temperatures on the CAN Hydraulic Testers.

 

Due the sturdy Stainless-Steel design, the quick response time (< 1 ms) and the high accuracy (±0,25% FS* typ.) with automatic sensor recognition, the pressure / temperature sensor is a reliable and flexible solution for the CAN Hydraulic Tester. The status of the sensor is indicated via LED.

 

Connecting the CAN Pressure / Temperature Sensor to the CAN Hydraulic Tester a CAN Connection Cable and a CAN Terminating Resistor is needed.