Insert 5/8" - M22x1.5 nut 15L
Hydraulic hose insert coupling with a metric female nut connection for assembling hose lines with a separate ferrule. The 24° seat Light interface is designed to connect to a matching 24° male cone, with an NBR O-ring supporting the seal at the connection.
Selection is typically based on hose size and the end connection geometry. This version is for 5/8" hose size (pipe diameter 15 mm) with M22x1.5 female thread, straight execution (0°), 27 mm spanner size, and overall dimensions C 31 mm and E 27 mm. Surface treatment is electro-galvanized with white chromatized finish. Rated for max 275 bar and temperatures from -30 °C to +100 °C.
Typical Applications
- Assembly of hydraulic hose lines where an insert coupling with separate ferrule is required
- Hydraulic connections using a metric 24° male cone interface
Artikelnummer:
4722-15-10
Förpackningsstorlek:
1 pcs
Minsta beställningskvantitet:
1 pcs
Angle
0 °
Brand Name
I.M.M Hydraulics
C
31 mm
Corrosion resistance
720 hours salt spray DIN EN ISO 9227
Diameter pipe
15 mm
E
27 mm
Hose coupling type
For separate ferrule
Hose size
5/8 "
Key size
27 mm
Material
Steel
Model code
0085-10-22
Pressure max.
275 bar
Sealing material
NBR
Series
L
Standard ISO
ISO 12151-2, ISO 8434-1
Surface treatment
Electro-galvanized / White chromatized
T
M22x1,5
Temperature max.
+100 °C
Temperature min.
-30 °C
Thread metric
M22x1,5
Torque tightening
76 Nm
Förpackningsstorlek
1 pcs
Streckkod
143095
Bruttovikt
0,09 Kg
Nettovikt
0,09 Kg
Ursprungsland
ITA
Intrastat artikelkod
73269098
Hydraulic hose insert coupling with a metric female nut connection for assembling hose lines with a separate ferrule. The 24° seat Light interface is designed to connect to a matching 24° male cone, with an NBR O-ring supporting the seal at the connection.
Selection is typically based on hose size and the end connection geometry. This version is for 5/8" hose size (pipe diameter 15 mm) with M22x1.5 female thread, straight execution (0°), 27 mm spanner size, and overall dimensions C 31 mm and E 27 mm. Surface treatment is electro-galvanized with white chromatized finish. Rated for max 275 bar and temperatures from -30 °C to +100 °C.
Typical Applications
- Assembly of hydraulic hose lines where an insert coupling with separate ferrule is required
- Hydraulic connections using a metric 24° male cone interface
Obs: För att öppna 3D-filer krävs ett program som stöder filformatet
Copyright © 2026 HydraSpecma