C.B. Valve 20l/m 69-207bar CP448-1-B-0-E-B-XXX-4.5-040
Overcenter Valve, Standard, Direct Acting, Internal Drain, Port 3 Pilot
This is a direct acting overcenter valve, which is a pilot assisted relief with a free flow check. With the relief valve set at approximately 1.3 times the maximum load induced pressure, the valve will prevent flow from port 1 to 2. When pilot pressure is applied to port 3, the valve will meter the flow from port 1 to 2, compensating for any change in pilot pressure due to over-running or unstable loads. Free flow takes place from port 2 to port 1 through the check portion of the valve.
These valves are ideal in most applications bringing stability, load holding, and hose failure protection when the valve is mounted onto or into the actuator. The spring chamber is connected to the valve port 2, so any back pressure will increase the pilot pressure required to keep the valve open and the pressure at which the valve will open as a relief valve.
Varenummer:
134507.000
Pakke str.:
1 st
Min. bestillingsenhed er:
1 st
Cavity
CP08-3L
Flow Nominel
20 lpm
Forureningsgrad maks.
20/18/14 - ISO 4406
Model kode
CP448-1-B-0-E-B-XXX-4.5-040
Mærke navn
Danfoss
Olieviskositet anbefalet
12 - 54 cSt
Pakningsmateriale
NBR
Pilotforhold
4,5:1
Tilspændingsmoment
34 - 41 Nm
Tryk maks.
350 bar
Trykindstilling maks.
350 bar
Trykindstilling min.
103 bar
Pakke str.
1 st
Stregkode
374692
Brutto vægt
0,16 Kg
Netto vægt
0,16 Kg
Oprindelsesland
ITA
Intrastat varekode
84812010
Overcenter Valve, Standard, Direct Acting, Internal Drain, Port 3 Pilot
This is a direct acting overcenter valve, which is a pilot assisted relief with a free flow check. With the relief valve set at approximately 1.3 times the maximum load induced pressure, the valve will prevent flow from port 1 to 2. When pilot pressure is applied to port 3, the valve will meter the flow from port 1 to 2, compensating for any change in pilot pressure due to over-running or unstable loads. Free flow takes place from port 2 to port 1 through the check portion of the valve.
These valves are ideal in most applications bringing stability, load holding, and hose failure protection when the valve is mounted onto or into the actuator. The spring chamber is connected to the valve port 2, so any back pressure will increase the pilot pressure required to keep the valve open and the pressure at which the valve will open as a relief valve.
Copyright © 2025 HydraSpecma