3/8" Insert - (12S) M20x1.5 female - 45°
Hose insert for hydraulic hose assemblies, designed to be used with a separate ferrule. The 45° angled female threaded end is used to connect a hose line to a matching male threaded port where an angled outlet is required.
Selection is primarily based on hose size (3/8"), the connection thread (M20x1.5 female), and the required bend orientation (45°). The 12S designation identifies the specified connection size/series for this fitting.
Typical Applications
- Hydraulic hose assembly manufacturing and service work
- Hydraulic lines where a 45° outlet helps route the hose and reduce bending at the connection
Artikelnummer:
6GS12FDHORX45
Förpackningsstorlek:
1 pcs
Minsta beställningskvantitet:
1 pcs
A
86,7 mm
Angle
45 °
B
50,8 mm
Brand Name
Gates
Corrosion resistance
500 hours salt spray ASTM B-117
D
3/8"
DN
10
Diameter pipe
12 mm
E
18,9 mm
H
24 mm
Hose coupling type
For separate ferrule
Hose size
3/8 "
Material
Steel
Model code
6GS-12FDHORX45
REACH compliant
Yes
RoHs compliant
Yes
Sealing material
NBR
Series
S
Surface treatment
TuffCoat™
Temperature max.
+100 °C
Temperature min.
-35 °C
Thread inner metric
M20x1,5
Torque tightening
48 - 52 Nm
Förpackningsstorlek
1 pcs
Streckkod
389463
Bruttovikt
0,10 Kg
Nettovikt
0,10 Kg
Ursprungsland
CZE
Intrastat artikelkod
73269098
Hose insert for hydraulic hose assemblies, designed to be used with a separate ferrule. The 45° angled female threaded end is used to connect a hose line to a matching male threaded port where an angled outlet is required.
Selection is primarily based on hose size (3/8"), the connection thread (M20x1.5 female), and the required bend orientation (45°). The 12S designation identifies the specified connection size/series for this fitting.
Typical Applications
- Hydraulic hose assembly manufacturing and service work
- Hydraulic lines where a 45° outlet helps route the hose and reduce bending at the connection
Copyright © 2026 HydraSpecma