Snabbkoppling Typ RoFLEX Hona Inv-G1.1/2''
Product Description Screw-to-connect couplings of the HR Series from STAUFF consist of a female body with external thread and a male tip with a screw sleeve. The Series is developed for particularly heavy-duty, high pressure and high pulsing applications for connecting hydraulic lines up to DN38 (1 1/2"). Coupling (screwing) and uncoupling (unscrewing) of the two halves is safe and very easy. After the connection is complete, all internal components have minimal play or clearance, which significantly reduces the risk of material fatigue. Another advantage is that the risk of permanent indentation, so-called "brinelling", on the surface of the male tip is eliminated, which can occur with push-to-connect couplings in similar extreme applications. The proven design is suitable for use in heavy construction machinery and available in nominal sizes 10, 12,5, 19, 25, 38 (3/8" - 1 1/2"). Features Poppet Valve Zinc-Plating and Thick-Film-Passivation (Chrome III) Can be connect under pressure up to 100 bar (1450 PSI)
Varenummer:
5005-1.1/2
Pakke str.:
1 st
Min. bestillingsenhed er:
1 st
Användingsområde
Hydraulolja, Olja, Smörjfett
Flow max.
700 lpm
Gänga inv.
G 1.1/2 BSP
Modell kod
QRC-HR-38-F-G24-BT-W66
Märke namn
Stauff
Packningsmaterial
NBR
Serie
HR
Storlek
1.1/2 "
Temperatur max.
+100 °C
Temperatur min.
-25 °C
Tillverkningsmaterial
Kolstål
Tryck max.
300 bar
Ytskiktbehandling
Förzinkad
Pakke str.
1 st
Stregkode
443211
Brutto vægt
1,20 Kg
Netto vægt
1,20 Kg
Oprindelsesland
Intrastat varekode
84812010
Product Description Screw-to-connect couplings of the HR Series from STAUFF consist of a female body with external thread and a male tip with a screw sleeve. The Series is developed for particularly heavy-duty, high pressure and high pulsing applications for connecting hydraulic lines up to DN38 (1 1/2"). Coupling (screwing) and uncoupling (unscrewing) of the two halves is safe and very easy. After the connection is complete, all internal components have minimal play or clearance, which significantly reduces the risk of material fatigue. Another advantage is that the risk of permanent indentation, so-called "brinelling", on the surface of the male tip is eliminated, which can occur with push-to-connect couplings in similar extreme applications. The proven design is suitable for use in heavy construction machinery and available in nominal sizes 10, 12,5, 19, 25, 38 (3/8" - 1 1/2"). Features Poppet Valve Zinc-Plating and Thick-Film-Passivation (Chrome III) Can be connect under pressure up to 100 bar (1450 PSI)
Copyright © 2025 HydraSpecma