Metal oil filler and breather cap - 3my
Oil filler and air breather cap for hydraulic reservoirs, combining a filling point with an integrated air filter to reduce solid contamination entering the tank as the oil level changes.
Bolted tank mounting with 6 bolts. The breather section provides nominal air flow of 450 l/min at Δp 0.02 bar. Sealing is via NBR, and the integrated strainer basket (height 120 mm) helps retain coarse contamination during filling.
Typical Applications
- Hydraulic reservoirs where air exchange and filtered tank breathing are required
- Filling point on tanks during commissioning and maintenance procedures
Varenummer:
TAP90RL03
Pakke str.:
1 pcs
Min. bestillingsenhed er:
1 pcs
Antal bolte
6
Boltcirkel
73 mm
Diameter bolthul
5,0 mm
Diameter hul
51 mm
Diameter si
44 mm
Flow luft nominelt
450 lpm
Luftfilter finhed
3 my
Model kode
TAP90-R-03-A-0-0-1-P01
Montering
Bolt
Mærke navn
MP Filtri
Pakningsmateriale
NBR
Si højde
120 mm
Temperatur maks.
+100 °C
Temperatur min.
-25 °C
Pakke str.
1 pcs
Stregkode
442825
Brutto vægt
0,23 Kg
Netto vægt
0,23 Kg
Oprindelsesland
ITA
Intrastat varekode
84212980
Oil filler and air breather cap for hydraulic reservoirs, combining a filling point with an integrated air filter to reduce solid contamination entering the tank as the oil level changes.
Bolted tank mounting with 6 bolts. The breather section provides nominal air flow of 450 l/min at Δp 0.02 bar. Sealing is via NBR, and the integrated strainer basket (height 120 mm) helps retain coarse contamination during filling.
Typical Applications
- Hydraulic reservoirs where air exchange and filtered tank breathing are required
- Filling point on tanks during commissioning and maintenance procedures
Bemærk: Åbning af 3D-filer kræver et program der understøtter fil-formatet
Copyright © 2026 HydraSpecma