Metal oil filler and breather cap - 3my
Oil filler and air breather cap for hydraulic reservoirs, combining a filling point with an integrated air filter to reduce solid contamination entering the tank as the oil level changes.
Bolted tank mounting with 6 bolts. The breather section provides nominal air flow of 450 l/min at Δp 0.02 bar. Sealing is via NBR, and the integrated strainer basket (height 120 mm) helps retain coarse contamination during filling.
Typical Applications
- Hydraulic reservoirs where air exchange and filtered tank breathing are required
- Filling point on tanks during commissioning and maintenance procedures
Artikelnummer:
TAP90RL03
Förpackningsstorlek:
1 pcs
Minsta beställningskvantitet:
1 pcs
Airfilter fineness
3 my
Brand Name
MP Filtri
Diameter Bolt hole
5,0 mm
Diameter hole
51 mm
Diameter strainer
44 mm
Flow air nominal
450 lpm
Holes circle
73 mm
Model code
TAP90-R-03-A-0-0-1-P01
Mount
Bolt
Number of bolts
6
Sealing material
NBR
Strainer height
120 mm
Temperature max.
+100 °C
Temperature min.
-25 °C
Förpackningsstorlek
1 pcs
Streckkod
442825
Bruttovikt
0,23 Kg
Nettovikt
0,23 Kg
Ursprungsland
ITA
Intrastat artikelkod
84212980
Oil filler and air breather cap for hydraulic reservoirs, combining a filling point with an integrated air filter to reduce solid contamination entering the tank as the oil level changes.
Bolted tank mounting with 6 bolts. The breather section provides nominal air flow of 450 l/min at Δp 0.02 bar. Sealing is via NBR, and the integrated strainer basket (height 120 mm) helps retain coarse contamination during filling.
Typical Applications
- Hydraulic reservoirs where air exchange and filtered tank breathing are required
- Filling point on tanks during commissioning and maintenance procedures
Obs: För att öppna 3D-filer krävs ett program som stöder filformatet
Copyright © 2026 HydraSpecma