Temperatursensor M10x1
The CAN Temperature Sensor-PPC-CAN-T are specially designed for use with the CAN Hydraulic Testers. This sensor is using the CANopen protocol to transfer the measurement values to the CAN Hydraulic Testers. The Sensor-PPC-CAN-T is compatible with the CAN Flow Turbine Flowmeter with a M10x1 thread and the Straight Threaded Joint SGV-16S-G-W3. Most technical details are the same as with the Temperature Sensor-PPC-04/12-T.
Due their sturdy Stainless-Steel design with automatic sensor recognition, the CAN Temperature Sensor is a
reliable and flexible solution for the CAN Hydraulic Tester. The status of the sensor is indicated via LED.
To connect the CAN Temperature Sensor to the CAN Hydraulic Tester a CAN Connection Cable and a CAN Terminating Resistor is needed.
Artikelnummer:
PPC-CAN-T-M02
Förpackningsstorlek:
1 st
Minsta beställningskvantitet:
1 st
Märke namn
Stauff
Sensor typ
CAN
Temperatur omgivning max.
+85 °C
Temperatur omgivning min.
-40 °C
Temperaturmåling max.
+150 °C
Temperaturmåling min.
-40 °C
Tillverkningsmaterial
Stainless steel
Tryck max.
630 bar
Tryck spräng min.
2150 bar
Utgående signal min.
0 V
Pakke str.
1 st
Stregkode
356999
Brutto vægt
Kg
Netto vægt
Kg
Oprindelsesland
deu
The CAN Temperature Sensor-PPC-CAN-T are specially designed for use with the CAN Hydraulic Testers. This sensor is using the CANopen protocol to transfer the measurement values to the CAN Hydraulic Testers. The Sensor-PPC-CAN-T is compatible with the CAN Flow Turbine Flowmeter with a M10x1 thread and the Straight Threaded Joint SGV-16S-G-W3. Most technical details are the same as with the Temperature Sensor-PPC-04/12-T.
Due their sturdy Stainless-Steel design with automatic sensor recognition, the CAN Temperature Sensor is a
reliable and flexible solution for the CAN Hydraulic Tester. The status of the sensor is indicated via LED.
To connect the CAN Temperature Sensor to the CAN Hydraulic Tester a CAN Connection Cable and a CAN Terminating Resistor is needed.
Copyright © 2026 HydraSpecma