Pressure gauge adaptor 1/4 M16 Direct
Direct gauge adaptor for connecting a pressure gauge to a measuring point with an M16x1,5 test connection. The adaptor provides a G 1/4 BSP threaded interface for the gauge and seals with an O-ring.
Used where pressure needs to be measured in a hydraulic system via a test coupling interface. The steel body with zinc-nickel plated surface treatment is suited for demanding workshop and service use, and the NBR seal supports operation within the specified temperature range.
Typical Applications
- Connecting a pressure gauge to hydraulic test points with M16x1,5 interface
- Pressure measurement during commissioning, troubleshooting, and service work
Varenummer:
M02-16X1.5-G1/4
Pakke str.:
1 pcs
Min. bestillingsenhed er:
1 pcs
Gevind indvendig
G 1/4 BSP
Gevind indvendig metrisk
M16x1,5
HEX A
19 mm
Materiale
Steel
Model kode
SMD-15-G1/4-B-OR-W3
Mærke navn
Stauff
Overfladebehandling
Zinc-Nickel plated
Pakningsmateriale
NBR
T
G 1/4 BSP
Temperatur maks.
+100 °C
Temperatur min.
-20 °C
Tryk maks.
630 bar
h
41 mm
Pakke str.
1 pcs
Stregkode
246183
Brutto vægt
0,05 Kg
Netto vægt
0,05 Kg
Oprindelsesland
DEU
Intrastat varekode
84812010
Direct gauge adaptor for connecting a pressure gauge to a measuring point with an M16x1,5 test connection. The adaptor provides a G 1/4 BSP threaded interface for the gauge and seals with an O-ring.
Used where pressure needs to be measured in a hydraulic system via a test coupling interface. The steel body with zinc-nickel plated surface treatment is suited for demanding workshop and service use, and the NBR seal supports operation within the specified temperature range.
Typical Applications
- Connecting a pressure gauge to hydraulic test points with M16x1,5 interface
- Pressure measurement during commissioning, troubleshooting, and service work
Bemærk: Åbning af 3D-filer kræver et program der understøtter fil-formatet
Copyright © 2026 HydraSpecma