Premium Chem Master UHMWPE SD Dim.: 2 1/2 (63 x 79mm)
Areas of use: Industrial chemicals, mineral oil products, solvents, acids, alkalis.
Characteristics: Very universal suction and discharge hose (SD) according to EN12115 capable of handling a wide spectrum of corrosive chemicals and acids. The hose contains a wire helix for full suction capability. For resistance table - contact HydraSpecma A/S.
Electrical conductivity: R<106 Ohm. Construction: Mandrel-built suction- and pressure hose with reinforcements of woven yarns and steel-spiral between the layers. Electrical discharge through inner-liner and antistatic wires.
Materials: Inside: UHMWPE, black, smooth and conductive. Outside: CSM rubber, black, superior resistance to weather and abrasion, excellent chemical and oil resistance.
Couplings: We recommend - for safety reasons: Always use couplings with safety clamps according to EN 14420-3 / DIN 2817.
Partnumber:
CMUSD-63
Package size:
61 m
Min. order quantity is:
61 m
Användingsområde
Chemicals compatible with UHMWPE
Böjningsradie
315 mm
Diameter inv.
63 mm
Diameter utv.
79 mm
Elektrisk konduktivitet
R < 10^6 Ohm
Färg
Black
Innertub
UHMWPE
Längd
40 m
Märke namn
Danfoss
Standard EN
EN 12115
Storlek
2.1/2 "
Temperatur intermittent max.
+130 °C
Temperatur max.
+100 °C
Temperatur min.
-35 °C
Tillverkningsmaterial
UHMWPE
Tryck max.
16 bar
Tryck spräng min.
64 bar
Vakuum max.
0.9 bar
Yttertub
CSM (Chlorosulfinated Polyethylene) based
Förpackningsstorlek
61 m
Streckkod
228451
Bruttovikt
2,60 Kg
Nettovikt
2,60 Kg
Ursprungsland
TUR
Intrastat artikelkod
40094100
Areas of use: Industrial chemicals, mineral oil products, solvents, acids, alkalis.
Characteristics: Very universal suction and discharge hose (SD) according to EN12115 capable of handling a wide spectrum of corrosive chemicals and acids. The hose contains a wire helix for full suction capability. For resistance table - contact HydraSpecma A/S.
Electrical conductivity: R<106 Ohm. Construction: Mandrel-built suction- and pressure hose with reinforcements of woven yarns and steel-spiral between the layers. Electrical discharge through inner-liner and antistatic wires.
Materials: Inside: UHMWPE, black, smooth and conductive. Outside: CSM rubber, black, superior resistance to weather and abrasion, excellent chemical and oil resistance.
Couplings: We recommend - for safety reasons: Always use couplings with safety clamps according to EN 14420-3 / DIN 2817.
Copyright © 2026 HydraSpecma