1" Insert - (25S) M36x2 female - 45°
Hydraulic hose insert designed to be assembled with a separate ferrule. The 45° angled female metric thread connection supports routing the hose line where a straight fitting would cause tight bends or limited clearance.
Selection is primarily based on hose size 1", the female thread M36x2, and the 45° connection angle to match the required port interface and hose routing.
Typical Applications
- Hydraulic hose assemblies where a 45° angled female metric connection is required
- Hose routing in confined spaces to reduce hose bending at the connection point
Osanumero:
16GS25FDHORX45
Pakkauskoko:
1 pcs
Pienin tilausmäärä on:
1 pcs
A
159,7 mm
B
103,3 mm
D
1"
DN
25
E
35,1 mm
H
46 mm
Kierre metrinen
M36x2
Kierre sisä
M36x2
Kiristysmomentti
125 - 135 Nm
Korroosionkestävyys
500 hours salt spray ASTM B-117
Kulma
45 °
Letkun kytkentätyyppi
For separate ferrule
Letkunhalkaisija sis.
1 "
Lämpötila max.
+100 °C
Lämpötila min.
-35 °C
Mallikoodi
16GS-25FDHORX45
Materiaali
Steel
Paine max.
420 bar
Pinta
TuffCoat™
Putken halkaisija
25 mm
REACH yhteensopiva
Yes
RoHS yhteensopiva
Yes
Sarja
S
Tiivistysmateriaali
NBR
Tuotemerkit
Gates
Förpackningsstorlek
1 pcs
Streckkod
200499
Bruttovikt
0,65 Kg
Nettovikt
0,65 Kg
Ursprungsland
CZE
Intrastat artikelkod
73269098
Hydraulic hose insert designed to be assembled with a separate ferrule. The 45° angled female metric thread connection supports routing the hose line where a straight fitting would cause tight bends or limited clearance.
Selection is primarily based on hose size 1", the female thread M36x2, and the 45° connection angle to match the required port interface and hose routing.
Typical Applications
- Hydraulic hose assemblies where a 45° angled female metric connection is required
- Hose routing in confined spaces to reduce hose bending at the connection point
Copyright © 2026 HydraSpecma