Flow Divider ventil 114l/m 1:2 CP342-3-U-0-1020
This is a fixed ratio flow divider/combiner valve.
In dividing mode, flow enters port 3 and passes across two fixed orifices in linked spools. If the pressure drop through one orifice is higher than the other, then the spools will move together to restrict the flow in the lower pressure outlet port. This maintains equal pressure drops across the spools, thus maintaining the flow division in the outlet ports.
In combining mode, flow will enter ports 2 and 4 pass through the orifices, which causes the spools to move to restrict the higher-pressure inlet and maintain equal pressure drops and equal flow into the valve.
Partnumber:
139664-CP342
Package size:
1 st
Min. order quantity is:
1 st
Brand Name
Danfoss
Cavity
CP16-4
Contamination level max.
20/18/14 - ISO 4406
Flow max. regulated
114 lpm
Flow min. regulated
114 lpm
Flow rate nominal LMin
150 lpm
Model code
CP342-3-U-0-1020
Oil viscocity recommended
12 - 54 cSt
Pressure compensated
Yes
Pressure max.
450 bar
Sealing material
NBR
Temperature max.
+100 °C
Temperature min.
-40 °C
Torque tightening
122 - 136 Nm
Package size
1 st
Barcode
379564
Gross weight
0,41 Kg
Net weight
0,41 Kg
Country of origin
ITA
Intrastat code
84812010
This is a fixed ratio flow divider/combiner valve.
In dividing mode, flow enters port 3 and passes across two fixed orifices in linked spools. If the pressure drop through one orifice is higher than the other, then the spools will move together to restrict the flow in the lower pressure outlet port. This maintains equal pressure drops across the spools, thus maintaining the flow division in the outlet ports.
In combining mode, flow will enter ports 2 and 4 pass through the orifices, which causes the spools to move to restrict the higher-pressure inlet and maintain equal pressure drops and equal flow into the valve.
Copyright © 2025 HydraSpecma