5/8" Hydraulic hose SPT-210CH - 2SC WP 350 bar
Wire-braided hydraulic hose for conveying hydraulic media in high-pressure fluid power lines. The hose is built with a NBR (nitrile) tube, two layers of high tensile steel wire braid reinforcement, and a synthetic rubber cover.
With a 5/8" (16 mm) inner diameter and 23.6 mm outer diameter, this hose is suited for hydraulic lines where a compact routing is needed, supported by a minimum bend radius of 90 mm. Rated working pressure is 350 bar with a minimum bursting pressure of 1400 bar. The hose meets EN 857 2SC and ISO 11237 2SC and is specified as flame resistant.
Typical Applications
- Hydraulic pressure lines for oil, diesel, and grease media
- Hydraulic hose assemblies where EN 857 2SC / ISO 11237 2SC hose specification is required
Artikelnummer:
SPT210CH
Förpackningsstorlek:
450 m
Minsta beställningskvantitet:
1 m
Användingsområde
Diesel, Grease, Oil
Armering
2 layer high tensile steel wire braid
Bestillingsenhed
Single hose
Böjningsradie
90 mm
Diameter inv.
16 mm
Diameter utv.
23.6 mm
Flamresistent
Yes
Innertub
NBR (Nitrile)
Märke namn
Hydraspecma
REACH compliant
Yes
RoHs compliant
Yes
Slangdimension
5/8 "
Slangtyp
2SC
Standard EN
EN 857 2SC
Standard ISO
ISO 11237 2SC
Temperatur intermittent max.
+135 °C
Temperatur max.
+120 °C
Temperatur min.
-40 °C
Tryck max.
350 bar
Tryck spräng min.
1400 bar
Yttertub
Synthetic rubber
Förpackningsstorlek
450 m
Streckkod
421660
Bruttovikt
0,28 Kg
Nettovikt
0,28 Kg
Ursprungsland
ROU
Intrastat artikelkod
40092100
Wire-braided hydraulic hose for conveying hydraulic media in high-pressure fluid power lines. The hose is built with a NBR (nitrile) tube, two layers of high tensile steel wire braid reinforcement, and a synthetic rubber cover.
With a 5/8" (16 mm) inner diameter and 23.6 mm outer diameter, this hose is suited for hydraulic lines where a compact routing is needed, supported by a minimum bend radius of 90 mm. Rated working pressure is 350 bar with a minimum bursting pressure of 1400 bar. The hose meets EN 857 2SC and ISO 11237 2SC and is specified as flame resistant.
Typical Applications
- Hydraulic pressure lines for oil, diesel, and grease media
- Hydraulic hose assemblies where EN 857 2SC / ISO 11237 2SC hose specification is required
Copyright © 2026 HydraSpecma