Sequence valve with check valve 35-210 bar - 60 l/min
Direct-acting sequence valves with reverse-flow check will supply a secondary circuit with flow once the pressure at the inlet (port 1) has exceeded the valve setting. Additionally, these valves incorporate an integral check valve to provide reverse flow from port 2 (sequence) to port 1 (inlet). The pressure setting of a sequence valve controls the pressure at port 1 relative to the pressure at the drain (port 3).
- Although this is a zero pilot flow valve, port 3 (drain) must be connected to maintain a pressure reference in the control chamber. If port 3 is blocked, reciprocating seal weepage will cause the valve to malfunction.
- Pressure at port 3 is directly additive to the valve setting at a 1:1 ratio and should not exceed 350 bar.
- Suitable for use in load holding applications.
- All 3 port sequence cartridges are physically and functionally interchangeable (i.e. same flow path, same cavity for a given frame size).
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
Partnumber:
SCCA-LAN
Package size:
1 pcs
Min. order quantity is:
1 pcs
Kiristysmomentti
41 - 47 Nm
Lämpötila max.
+110 °C
Lämpötila min.
-30 °C
Mallikoodi
SCCALAN
Materiaali
Steel
Paine max.
350 bar
Paineen asetus max.
210 bar
Paineen asetus min.
35 bar
Poraus
T-11A
Puhtaustaso min.
19/17/14 - ISO 4406
Tiivistysmateriaali
NBR
Tilavuusvirta nimellinen l/min
60 lpm
Tuotemerkit
Sun Hydraulics
Öljyn viskositeetti suositus
2,8 - 380 cSt
Package size
1 pcs
Barcode
238042
Gross weight
0,22 Kg
Net weight
0,22 Kg
Country of origin
Intrastat code
84812010
Direct-acting sequence valves with reverse-flow check will supply a secondary circuit with flow once the pressure at the inlet (port 1) has exceeded the valve setting. Additionally, these valves incorporate an integral check valve to provide reverse flow from port 2 (sequence) to port 1 (inlet). The pressure setting of a sequence valve controls the pressure at port 1 relative to the pressure at the drain (port 3).
- Although this is a zero pilot flow valve, port 3 (drain) must be connected to maintain a pressure reference in the control chamber. If port 3 is blocked, reciprocating seal weepage will cause the valve to malfunction.
- Pressure at port 3 is directly additive to the valve setting at a 1:1 ratio and should not exceed 350 bar.
- Suitable for use in load holding applications.
- All 3 port sequence cartridges are physically and functionally interchangeable (i.e. same flow path, same cavity for a given frame size).
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
Copyright © 2026 HydraSpecma