CAN pressure sensor 0 > 600 bar

1 ms) and the high accuracy (±0,25% FS* typ.) with automatic sensor recognition, the CAN Pressure Sensors are a reliable and flexible solution for the CAN Hydraulic Tester. The status of the sensor is indicated via LED.

 Connecting the CAN Pressure Sensor to the CAN Hydraulic Tester a CAN Connection Cable and a CAN Terminating Resistor is needed.

 

;

The CAN Pressure Sensor-PPC-CAN-P-600 are specially designed for use with the CAN Hydraulic Testers. These sensors are using the CANopen protocol to transfer the measurement values to the CAN Hydraulic Testers. Most technical details are the same as with the analogue Pressure Sensors.

 Due their sturdy Stainless-Steel design, the quick response times (<

Artikelnummer:
PPC-CAN-P-600

Förpackningsstorlek:
1 pcs

Minsta beställningskvantitet:
1 pcs
Antal stifter
5

Användingområde
Neutral gases and liquids

Gänga
G 1/4 BSP

Lagringstemperatur maks.
+85

Lagringstemperatur min.
-25

Materialkvalitet
1.4301 / AISI304

Modell kod
Sensor-PPC-CAN-P-600

Märke namn
Stauff

Packningsmaterial
FKM/FPM (Viton®)

Sensor typ
CAN

Skyddsklass
IP 67

Temperatur max.
+105 °C

Temperatur min.
-25 °C

Temperatur omgivning max.
+85 °C

Temperatur omgivning min.
-25 °C

Tillverkningsmaterial
Stainless steel

Tryck max.
1200 bar

Tryck spräng min.
1800 bar

Tryckmätning
0 - 600 Bar

Tryckmätning noggrannhet
±0,5% FS

Vibration och stöt
IEC 60068-2-6 (20 g) / IEC 60068-2-27 (50 g)
Förpackningsstorlek
1 pcs

Streckkod
336990

Bruttovikt
Kg

Nettovikt
Kg

Ursprungsland
deu

Intrastat artikelkod
90262040

1 ms) and the high accuracy (±0,25% FS* typ.) with automatic sensor recognition, the CAN Pressure Sensors are a reliable and flexible solution for the CAN Hydraulic Tester. The status of the sensor is indicated via LED.

 Connecting the CAN Pressure Sensor to the CAN Hydraulic Tester a CAN Connection Cable and a CAN Terminating Resistor is needed.

 

;

The CAN Pressure Sensor-PPC-CAN-P-600 are specially designed for use with the CAN Hydraulic Testers. These sensors are using the CANopen protocol to transfer the measurement values to the CAN Hydraulic Testers. Most technical details are the same as with the analogue Pressure Sensors.

 Due their sturdy Stainless-Steel design, the quick response times (<