Reduction - 1" BSP x 1/4" BSP female - WD seal
Thread reducer for adapting between two different BSPP (Whitworth parallel) thread sizes in a hydraulic connection. The G 1 male thread connects to a matching female port, while the G 1/4 female thread accepts a corresponding male fitting or component.
Sealing is via a WD profile sealing ring in NBR, supporting a sealed connection at the interface. The steel body is zinc-nickel plated for surface protection. Suitable for operating pressures up to 400 bar and temperatures from -35 to +100.
Typical Applications
- Hydraulic pipework and manifolds where a BSPP port must be adapted from G 1 to G 1/4
- Service and retrofit work where thread-size reduction is required in a straight connection
Osanumero:
KN-16-04
Pakkauskoko:
20 pcs
Pienin tilausmäärä on:
1 pcs
Avainväli
41 mm
Kierre T1
G 1 BSP
Kierre T2
G 1/4 BSP
Kierre sisä
G 1/4 BSP
Kierre ulko
G 1 BSP
Kokonaispituus
29 mm
Korroosionkestävyys
1200 hours salt spray DIN EN ISO 9227
Kulma
0 °
L1
29 mm
L2
12,5 mm
Lämpötila max.
+100 °C
Lämpötila min.
-35 °C
Mallikoodi
FI-RED-R1-WD-R1/4-B-W3
Materiaali
Steel
Paine max.
400 bar
Pinta
Zinc-Nickel plated
Pituus
29 mm
Putken halkaisija
0 mm
REACH yhteensopiva
Yes
RoHS yhteensopiva
Yes
S1
41 mm
Tiivistysmateriaali
NBR
Tuotemerkit
Stauff
Tyyppi
Short
Varmuuskerroin
4
i
18 mm
Package size
20 pcs
Barcode
399808
Gross weight
0,19 Kg
Net weight
0,19 Kg
Country of origin
DEU
Intrastat code
73071110
Thread reducer for adapting between two different BSPP (Whitworth parallel) thread sizes in a hydraulic connection. The G 1 male thread connects to a matching female port, while the G 1/4 female thread accepts a corresponding male fitting or component.
Sealing is via a WD profile sealing ring in NBR, supporting a sealed connection at the interface. The steel body is zinc-nickel plated for surface protection. Suitable for operating pressures up to 400 bar and temperatures from -35 to +100.
Typical Applications
- Hydraulic pipework and manifolds where a BSPP port must be adapted from G 1 to G 1/4
- Service and retrofit work where thread-size reduction is required in a straight connection
Note: Opening 3D files requires a program that supports the file format
Copyright © 2026 HydraSpecma