S665-16-45U bulkhead elbow
45° bulkhead elbow for routing hydraulic tubing or hoses through a panel or bulkhead while changing direction. The fitting has JIC male connections on both sides, using a 37° flared seat connection interface.
Selection is typically based on the JIC thread size and the tube/line size. This version is sized for 16 mm and uses 7/8-14 JIC threads on both ends. The electro-galvanized, white chromatized surface treatment and specified corrosion resistance support use in demanding environments.
Typical Applications
- Bulkhead/panel pass-through connections in hydraulic lines where a 45° change of direction is needed
- Hydraulic hose and tube installations using 37° JIC flare connections
Varenummer:
VUP-16
Pakkestr.:
0 pcs
Min. bestillingsmengde er:
1 pcs
B
28 mm
C
55 mm
CH
30 mm
D
38,5 mm
Diameter rør
16 mm
Gevind udvendig
7/8-14 JIC
J
7/8-14 JIC
J1
7/8-14 JIC
Korrosions resistens
1400 hours salt spray DIN EN ISO 9227
Materiale
Steel
Mærke navn
FOR
Overfladebehandling
Electro-galvanized / White chromatized
T
16 mm
T1
16 mm
Tryk maks.
350 bar
Vinkel
45 °
Pakkestr.
0 pcs
Strekkode
5704295979557
Bruttovekt
0,18 Kg
Nettovekt
0,18 Kg
Opprinnelsesland
ITA
Intrastat produktkode
73071110
45° bulkhead elbow for routing hydraulic tubing or hoses through a panel or bulkhead while changing direction. The fitting has JIC male connections on both sides, using a 37° flared seat connection interface.
Selection is typically based on the JIC thread size and the tube/line size. This version is sized for 16 mm and uses 7/8-14 JIC threads on both ends. The electro-galvanized, white chromatized surface treatment and specified corrosion resistance support use in demanding environments.
Typical Applications
- Bulkhead/panel pass-through connections in hydraulic lines where a 45° change of direction is needed
- Hydraulic hose and tube installations using 37° JIC flare connections
Merk: Å åpne 3D-filer krever et program som stotter filformatet
Copyright © 2026 HydraSpecma