1/2" Hydraulic hose SPT-208CH - 2SC WP 350 bar
Hydraulic hose with 1/2" size for conveying hydraulic media in high-pressure lines. The hose is built with an NBR (nitrile) inner tube and a synthetic rubber cover, and reinforced with a 2 layer high tensile steel wire braid for pressure capability.
Designed for use with diesel, grease, and oil. The compact bend radius supports routing in confined installations while maintaining the specified hose geometry.
Typical Applications
- High-pressure hydraulic hose lines for diesel, grease, and oil
- Hydraulic installations where a compact bend radius is required for hose routing
Osanumero:
SPT208CH
Pakkauskoko:
0 m
Pienin tilausmäärä on:
1 m
Användingsområde
Diesel, Grease, Oil
Armering
2 layer high tensile steel wire braid
Bestillingsenhed
Single hose
Böjningsradie
80 mm
Diameter inv.
12.7 mm
Diameter utv.
20.8 mm
Flamresistent
Yes
Innertub
NBR (Nitrile)
Märke namn
Hydraspecma
REACH compliant
Yes
RoHs compliant
Yes
Slangdimension
1/2 "
Slangtyp
2SC
Standard EN
EN 857 2SC
Standard ISO
ISO 11237 2SC
Temperatur intermittent max.
+135 °C
Temperatur max.
+120 °C
Temperatur min.
-40 °C
Tryck max.
350 bar
Tryck spräng min.
1500 bar
Yttertub
Synthetic rubber
Pakkauskoko
0 m
Viivakoodi
5704334721369
Bruttopaino
0,28 Kg
Nettopaino
0,28 Kg
Alkuperämaa
ITA
Intrastat-koodi
40092100
Hydraulic hose with 1/2" size for conveying hydraulic media in high-pressure lines. The hose is built with an NBR (nitrile) inner tube and a synthetic rubber cover, and reinforced with a 2 layer high tensile steel wire braid for pressure capability.
Designed for use with diesel, grease, and oil. The compact bend radius supports routing in confined installations while maintaining the specified hose geometry.
Typical Applications
- High-pressure hydraulic hose lines for diesel, grease, and oil
- Hydraulic installations where a compact bend radius is required for hose routing
Copyright © 2026 HydraSpecma