Flow test indicator kit,200lpm
The RFI series provides the ideal solution for continuous monitoring or intermittent use commissioning and servicing hydraulic systems for pressures up to 420 bar (6000 psi).
They can be used on mobile and industrial hydraulic circuits and also on lub rication and coolant systems using oil or water-oil emulsions.
The direct acting FI series can be installed in hazardous areas or on applications where no electrical power is available. The flow indicator design ensures good reliability and minimises the effects of viscosity changes. The large clear 63 mm diameter dial ensures that quick checks can be made to determine pump performance and setting of flow control valves.
The thermometer is an gled deep into the block to sense the temperature changes in the fluid passage. Allows flow in the reverse direction.
For external protection the readout scales of both thermometer and flow indicator are recessed and shielded behind impact resistant windows. The whole unit is fully sealed and extremely rugged.
Belastningsventil
Yes
Flödeshastighet nominell LMin
200 lpm
Flödesmätning nogrannhet
±4% FS (20 ~ 40 ºC)
Gänga
G 1 BSP
Märke namn
Webtec
Mätflöde max.
200 lpm
Mätflöde min.
10 lpm
Temperaturmätning nogrannhet
±2,5 %
Tryck max.
420 bar
Tryckmätning noggrannhet
±1,6% FS
Utgång
G 1 BSP
Pakke str.
0 pcs
Stregkode
5704295999869
Brutto vægt
7,50 Kg
Netto vægt
7,50 Kg
Oprindelsesland
Intrastat varekode
90261021
The RFI series provides the ideal solution for continuous monitoring or intermittent use commissioning and servicing hydraulic systems for pressures up to 420 bar (6000 psi).
They can be used on mobile and industrial hydraulic circuits and also on lub rication and coolant systems using oil or water-oil emulsions.
The direct acting FI series can be installed in hazardous areas or on applications where no electrical power is available. The flow indicator design ensures good reliability and minimises the effects of viscosity changes. The large clear 63 mm diameter dial ensures that quick checks can be made to determine pump performance and setting of flow control valves.
The thermometer is an gled deep into the block to sense the temperature changes in the fluid passage. Allows flow in the reverse direction.
For external protection the readout scales of both thermometer and flow indicator are recessed and shielded behind impact resistant windows. The whole unit is fully sealed and extremely rugged.
Copyright © 2025 HydraSpecma