1/2" Insert - 1/2" BSP female - 90° - AISI316
90° hose insert for hydraulic hose assemblies, designed to connect a 1/2" hose to a BSP female swivel thread. The elbow geometry is used where space constraints require a change of hose routing direction while maintaining a threaded connection interface.
The connection side uses a BSP female thread G 1/2 with a 60° cone and an O-ring seal. The sealing material is FKM/FPM. The fitting is specified for 1–2 layer hoses and is intended for use with a separate ferrule. Manufactured in stainless steel quality 1.4571 / AISI316Ti.
Typical Applications
- Hydraulic hose assemblies where a BSP female swivel connection is required at the hose end
- Installations requiring a 90° elbow to route hoses in confined spaces
Varenummer:
R0808NO90
Pakke str.:
0 pcs
Min. bestillingsenhed er:
1 pcs
Angle
90 °
HEX 1
27 mm
Hose coupling type
For separate ferrule
Hose size
1/2 "
L
73 mm
L1
30,5 mm
L2
42 mm
Material
Stainless steel
Material quality
1.4571 / AISI316Ti
Model code
841170808
R1
G 1/2 BSP
Sealing material
FKM/FPM (Viton®)
Temperature max.
+100 °C
Temperature min.
-30 °C
Torque tightening
50 Nm
ØC
9,5 mm
ØD
9,5 mm
Pakke str.
0 pcs
Stregkode
5704334150688
Brutto vægt
0,13 Kg
Netto vægt
0,13 Kg
Oprindelsesland
ESP
Intrastat varekode
73269098
90° hose insert for hydraulic hose assemblies, designed to connect a 1/2" hose to a BSP female swivel thread. The elbow geometry is used where space constraints require a change of hose routing direction while maintaining a threaded connection interface.
The connection side uses a BSP female thread G 1/2 with a 60° cone and an O-ring seal. The sealing material is FKM/FPM. The fitting is specified for 1–2 layer hoses and is intended for use with a separate ferrule. Manufactured in stainless steel quality 1.4571 / AISI316Ti.
Typical Applications
- Hydraulic hose assemblies where a BSP female swivel connection is required at the hose end
- Installations requiring a 90° elbow to route hoses in confined spaces
Copyright © 2026 HydraSpecma