P-sats SUN, T-3A + T-5A, Viton

This Sun Cartridge seal kit is for Suns series 2 valve, with the T-3A or T-5A cavity.

  • The shelf life for this cartridge seal kit is twenty years from date of purchase. This date will be printed on the kit packaging.
  • The Series 2, two port cavity comes in two versions: the T-3A and the T-5A. The T-3A cavity is typically used in relief applications which require larger port areas, hence a deeper cavity. The T-5A cavity is typically used in flow control applications and utilizes a smaller port area. Since both cavities are Series 2, two port, they share common seal kits, but exclude the possibility of cartridge interchangeability between the two functions.

 

Notes:

  • Install back-up rings and O-rings as shown on the picture.
  • When installing continuous back-up rings, use the same technique and the same care used to install O-rings.
  • When installing cartridge - be sure to torque to recommended value of 61 – 68 Nm.

Artikelnummer:
990-203-006

Förpackningsstorlek:
0 pcs

Minsta beställningskvantitet:
1 pcs
Brand Name
Sun Hydraulics

Cavity
T-5A

Sealing material
FKM/FPM (Viton®)
Package size
0 pcs

Barcode
5715803522127

Gross weight
Kg

Net weight
Kg

Country of origin
usa

This Sun Cartridge seal kit is for Suns series 2 valve, with the T-3A or T-5A cavity.

  • The shelf life for this cartridge seal kit is twenty years from date of purchase. This date will be printed on the kit packaging.
  • The Series 2, two port cavity comes in two versions: the T-3A and the T-5A. The T-3A cavity is typically used in relief applications which require larger port areas, hence a deeper cavity. The T-5A cavity is typically used in flow control applications and utilizes a smaller port area. Since both cavities are Series 2, two port, they share common seal kits, but exclude the possibility of cartridge interchangeability between the two functions.

 

Notes:

  • Install back-up rings and O-rings as shown on the picture.
  • When installing continuous back-up rings, use the same technique and the same care used to install O-rings.
  • When installing cartridge - be sure to torque to recommended value of 61 – 68 Nm.