Sealkit SUN valve T22A Buna

This Sun Cartridge seal kit is for Suns series 2 valve, with the T-3A or T-5A cavity.

  • The shelf life for this cartridge seal kit is ten years from date of purchase. This date will be printed on the kit packaging.
  • The Series 2, two port cavity comes in two versions: the T-3A and the T-5A. The T-3A cavity is typically used in relief applications which require larger port areas, hence a deeper cavity. The T-5A cavity is typically used in flow control applications and utilizes a smaller port area. Since both cavities are Series 2, two port, they share common seal kits, but exclude the possibility of cartridge interchangeability between the two functions.

 

Notes:

  • Install back-up rings and O-rings as shown on the picture.
  • When installing continuous back-up rings, use the same technique and the same care used to install O-rings.
  • When installing cartridge - be sure to torque to recommended value of 61 – 68 Nm.

.

Varenummer:
990-022-007

Pakke str.:
1 pcs

Min. bestillingsenhed er:
1 pcs
Cavity
T-22A

Mærke navn
Sun Hydraulics

Pakningsmateriale
NBR
Pakke str.
1 pcs

Stregkode
5704334726920

Brutto vægt
0,01 Kg

Netto vægt
0,01 Kg

Oprindelsesland

Intrastat varekode
84812010

This Sun Cartridge seal kit is for Suns series 2 valve, with the T-3A or T-5A cavity.

  • The shelf life for this cartridge seal kit is ten years from date of purchase. This date will be printed on the kit packaging.
  • The Series 2, two port cavity comes in two versions: the T-3A and the T-5A. The T-3A cavity is typically used in relief applications which require larger port areas, hence a deeper cavity. The T-5A cavity is typically used in flow control applications and utilizes a smaller port area. Since both cavities are Series 2, two port, they share common seal kits, but exclude the possibility of cartridge interchangeability between the two functions.

 

Notes:

  • Install back-up rings and O-rings as shown on the picture.
  • When installing continuous back-up rings, use the same technique and the same care used to install O-rings.
  • When installing cartridge - be sure to torque to recommended value of 61 – 68 Nm.

.