Pressure & Temp. sensor PT 600 Bar
The CAN Pressure / Temperature Sensor-PPC-CAN-PT-600 are specially designed for use with the CAN Hydraulic Testers. This sensor is using the CANopen protocol to transfer the measurement values to the CAN Hydraulic Testers. Most technical details are the same as with the Pressure / Temperature Sensor-PPC-04/12-PT. The CAN sensor is able to measure and display temperatures on the CAN Hydraulic Testers.
Due the sturdy Stainless-Steel design, the quick response time (< 1 ms) and the high accuracy (±0,25% FS* typ.) with automatic sensor recognition, the pressure / temperature sensor is a reliable and flexible solution for the CAN Hydraulic Tester. The status of the sensor is indicated via LED.
Connecting the CAN Pressure / Temperature Sensor to the CAN Hydraulic Tester a CAN Connection Cable and a CAN Terminating Resistor is needed.
Artikelnummer:
1810000336
Förpackningsstorlek:
0 pcs
Minsta beställningskvantitet:
1 pcs
Gänga
G 1/2 BSP
Märke namn
Stauff
Sensor typ
CAN
Temperatur max.
+105 °C
Temperatur min.
-25 °C
Temperatur omgivning max.
+85 °C
Temperatur omgivning min.
-25 °C
Tillverkningsmaterial
Stainless steel
Tryck max.
1200 bar
Tryck spräng min.
1800 bar
Tryckmätning
0-600 Bar
Förpackningsstorlek
0 pcs
Streckkod
5704334849612
Bruttovikt
Kg
Nettovikt
Kg
Ursprungsland
deu
Intrastat artikelkod
90262040
The CAN Pressure / Temperature Sensor-PPC-CAN-PT-600 are specially designed for use with the CAN Hydraulic Testers. This sensor is using the CANopen protocol to transfer the measurement values to the CAN Hydraulic Testers. Most technical details are the same as with the Pressure / Temperature Sensor-PPC-04/12-PT. The CAN sensor is able to measure and display temperatures on the CAN Hydraulic Testers.
Due the sturdy Stainless-Steel design, the quick response time (< 1 ms) and the high accuracy (±0,25% FS* typ.) with automatic sensor recognition, the pressure / temperature sensor is a reliable and flexible solution for the CAN Hydraulic Tester. The status of the sensor is indicated via LED.
Connecting the CAN Pressure / Temperature Sensor to the CAN Hydraulic Tester a CAN Connection Cable and a CAN Terminating Resistor is needed.
Copyright © 2026 HydraSpecma