Elaflex pipe connection type Gelbstahl.
Ares of use: - mineral oils - fuels - hot gases - cooling water with oil-containing additives - lubricating oils - hydraulic oil Characteristics: Rubber compensators for use within motorinstallations, especially on marine motors, generator plants etc. Are used in cooling water and lubricating system with high running temperatures, where type "Gelbring" cannot be used. Flame-resistant for 30 minutes at +800°C. Construction: Inside heatresistant, electrical conductive Nitrile rubber (NBR). Outside electrical conductive chloroprene rubber (CR). Reinforcement af steel wire braid Rubber bellows standard mounted with zinc-plated DIN-flanges, pressure range 10/16. Marked with 2 yellow stripes. On request available with other flange types, fx. acc. to ASA-150 standard. Contact HydraSpecma A/S for further information. On request available in dimensions up to DN 600. Certain dimensions available in other build lengths. For vacuum applications, we can supply different types of supporting spirals, depending of vacuum and dimension. Contact our sales office for further information.
Artikelnummer:
0402100150
Förpackningsstorlek:
0 pcs
Minsta beställningskvantitet:
1 pcs
Antal bulthål
8
Bultcirkel
240 mm
Diameter bulthål
22,0 mm
Diameter fläns
285 mm
Modell kod
ERV 150.16 GS
Märke namn
Elaflex
Storlek
150 mm
Temperatur intermittent max.
+100 °C
Temperatur max.
+90 °C
Temperatur min.
-20 °C
Totallängd
130 mm
Tryck max.
16 bar
Förpackningsstorlek
0 pcs
Streckkod
5704295604947
Bruttovikt
10,78 Kg
Nettovikt
10,78 Kg
Ursprungsland
Intrastat artikelkod
40169997
Ares of use: - mineral oils - fuels - hot gases - cooling water with oil-containing additives - lubricating oils - hydraulic oil Characteristics: Rubber compensators for use within motorinstallations, especially on marine motors, generator plants etc. Are used in cooling water and lubricating system with high running temperatures, where type "Gelbring" cannot be used. Flame-resistant for 30 minutes at +800°C. Construction: Inside heatresistant, electrical conductive Nitrile rubber (NBR). Outside electrical conductive chloroprene rubber (CR). Reinforcement af steel wire braid Rubber bellows standard mounted with zinc-plated DIN-flanges, pressure range 10/16. Marked with 2 yellow stripes. On request available with other flange types, fx. acc. to ASA-150 standard. Contact HydraSpecma A/S for further information. On request available in dimensions up to DN 600. Certain dimensions available in other build lengths. For vacuum applications, we can supply different types of supporting spirals, depending of vacuum and dimension. Contact our sales office for further information.
Copyright © 2026 HydraSpecma