Elaflex pipe connection type Gelbstahl.

Ares of use: - mineral oils - fuels - hot gases - cooling water with oil-containing additives - lubricating oils - hydraulic oil Characteristics: Rubber compensators for use within motorinstallations, especially on marine motors, generator plants etc. Are used in cooling water and lubricating system with high running temperatures, where type "Gelbring" cannot be used. Flame-resistant for 30 minutes at +800°C. Construction: Inside heatresistant, electrical conductive Nitrile rubber (NBR). Outside electrical conductive chloroprene rubber (CR). Reinforcement af steel wire braid Rubber bellows standard mounted with zinc-plated DIN-flanges, pressure range 10/16. Marked with 2 yellow stripes. On request available with other flange types, fx. acc. to ASA-150 standard. Contact HydraSpecma A/S for further information. On request available in dimensions up to DN 600. Certain dimensions available in other build lengths. For vacuum applications, we can supply different types of supporting spirals, depending of vacuum and dimension. Contact our sales office for further information.

Varenummer:
0402100125

Pakke str.:
0 pcs

Min. bestillingsenhed er:
1 pcs
Brand Name
Elaflex

Diameter Bolt hole
18,0 mm

Diameter flange
250 mm

Holes circle
210 mm

Model code
ERV 125.16 GS

Number of bolt holes
8

Pressure max.
16 bar

Size
125 mm

Temperature intermittent max.
+100 °C

Temperature max.
+90 °C

Temperature min.
-20 °C

Total length
130 mm
Pakke str.
0 pcs

Stregkode
5704295604930

Brutto vægt
11,00 Kg

Netto vægt
11,00 Kg

Oprindelsesland

Intrastat varekode
40169997

Ares of use: - mineral oils - fuels - hot gases - cooling water with oil-containing additives - lubricating oils - hydraulic oil Characteristics: Rubber compensators for use within motorinstallations, especially on marine motors, generator plants etc. Are used in cooling water and lubricating system with high running temperatures, where type "Gelbring" cannot be used. Flame-resistant for 30 minutes at +800°C. Construction: Inside heatresistant, electrical conductive Nitrile rubber (NBR). Outside electrical conductive chloroprene rubber (CR). Reinforcement af steel wire braid Rubber bellows standard mounted with zinc-plated DIN-flanges, pressure range 10/16. Marked with 2 yellow stripes. On request available with other flange types, fx. acc. to ASA-150 standard. Contact HydraSpecma A/S for further information. On request available in dimensions up to DN 600. Certain dimensions available in other build lengths. For vacuum applications, we can supply different types of supporting spirals, depending of vacuum and dimension. Contact our sales office for further information.