1/2" Hose burst cartridge valve
Hose burst cartridge valve for preventing uncontrolled movement of an actuator if a hose or line fails. The valve is installed in an actuator port and is designed to lock the flow automatically when a sudden increase in flow occurs, helping to hold the load.
The cartridge design with G 1/2 BSP connection defines the hydraulic interface for mounting. Selection is typically based on the required thread size, maximum system pressure, and the flow capacity needed for the actuator line.
Typical Applications
- Load-holding protection on hydraulic cylinders and actuators
- Hydraulic circuits where uncontrolled descent must be prevented in case of hose rupture
Partnumber:
VUBA-12
Package size:
1 pcs
Min. order quantity is:
1 pcs
Brand Name
OM Oleodinamica Marchesini
Flow max.
80 lpm
Flow rate nominal LMin
80 lpm
L
13 mm
L1
29 mm
L2
5 mm
L3
33 mm
L4
43 mm
Material
Steel
Oil viscocity recommended
30 cSt
Pressure max.
350 bar
S
1,6 mm
Thread
G 1/2 BSP
V
G 1/2 BSP
V1
1/2 BSP
ØC
15 mm
ØD
12,5 mm
ØF
19 mm
Package size
1 pcs
Barcode
241998
Gross weight
Kg
Net weight
Kg
Country of origin
ITA
Intrastat code
84812010
Hose burst cartridge valve for preventing uncontrolled movement of an actuator if a hose or line fails. The valve is installed in an actuator port and is designed to lock the flow automatically when a sudden increase in flow occurs, helping to hold the load.
The cartridge design with G 1/2 BSP connection defines the hydraulic interface for mounting. Selection is typically based on the required thread size, maximum system pressure, and the flow capacity needed for the actuator line.
Typical Applications
- Load-holding protection on hydraulic cylinders and actuators
- Hydraulic circuits where uncontrolled descent must be prevented in case of hose rupture
Copyright © 2026 HydraSpecma