3/4" Throttle/Check valve

Inline throttle/check valve for regulating flow in one direction while allowing free flow in the opposite direction via an integrated check function. Used to adjust actuator speed in hydraulic lines where one-way metering is required.

The valve has BSPP G 3/4 connections and is not pressure-compensated, meaning the set flow depends on system pressure and oil viscosity. Suitable for operation up to 250 bar within a temperature range of -30 to +100 °C.

Typical Applications
  • One-way flow control for adjusting cylinder or motor speed in hydraulic circuits
  • Inline installations where free return flow is required in the opposite direction

Artikelnummer:
VRF-34

Förpackningsstorlek:
1 pcs

Minsta beställningskvantitet:
1 pcs
Anbefalet olietemperatur
50 °C

C
G 3/4 BSP

CH
32 mm

D
51 mm

E
46 mm

Flow Nominel
110 lpm

Flow maks.
110 lpm

Gevind
G 3/4 BSP

L
95 mm

Længde
95 mm

Materiale
Steel

Mærke navn
OM Oleodinamica Marchesini

Olieviskositet anbefalet
30 cSt

Overfladebehandling
Zinc-plated

Pakningsmateriale
NBR

Sekskant
46 mm

Temperatur maks.
+100 °C

Temperatur min.
-30 °C

Tryk maks.
250 bar

Tryk åbning
0.5 bar

Trykkompenseret
No

V
G 3/4 BSP

Ventiltype
Throttle/checkvalve
Förpackningsstorlek
1 pcs

Streckkod
197940

Bruttovikt
Kg

Nettovikt
Kg

Ursprungsland
ITA

Intrastat artikelkod
84812010

Inline throttle/check valve for regulating flow in one direction while allowing free flow in the opposite direction via an integrated check function. Used to adjust actuator speed in hydraulic lines where one-way metering is required.

The valve has BSPP G 3/4 connections and is not pressure-compensated, meaning the set flow depends on system pressure and oil viscosity. Suitable for operation up to 250 bar within a temperature range of -30 to +100 °C.

Typical Applications
  • One-way flow control for adjusting cylinder or motor speed in hydraulic circuits
  • Inline installations where free return flow is required in the opposite direction