3/4" Hydraulichose SPT-112-N - 1SN WP 105 bar

Hydraulic hose for conveying fluids in hydraulic and lubrication circuits. The hose is built with a synthetic rubber inner tube and cover, reinforced with 1 layer high tensile steel wire braid for pressure capability and stable hose structure.

The 3/4" hose size with 19 mm inner diameter and 27,2 mm outer diameter is a common selection for medium-flow hydraulic lines. A minimum bend radius of 120 mm supports routing in confined installations while maintaining the hose geometry. The hose meets EN 853 1SN, ISO 1436 1SN and SAE 100R1AT, making it suitable where these hose standards are specified.

Typical Applications
  • Hydraulic lines for oil-based systems
  • Transfer lines for diesel, grease, oil and water media within the specified temperature range

Artikelnummer:
SPT112N

Förpackningsstorlek:
1 m

Minsta beställningskvantitet:
1 m
Skruvhylsa Skalfri 1T/1SN
Artikelnummer: 5002-12
Area of use
Diesel, Grease, Oil, Water

Bend radius
120 mm

Brand Name
Hydraspecma

Cover
Synthetic rubber

Diameter inner
19 mm

Diameter outer
27.2 mm

Hose size
3/4 "

Hose type
1SN

Pressure burst min.
420 bar

Pressure max.
105 bar

REACH compliant
Yes

Reinforcement
1 layer high tensile steel wire braid

RoHs compliant
Yes

Standard EN
EN 853 1SN

Standard ISO
ISO 1436 1SN

Standard SAE
SAE 100R1AT

Temperature intermittent max.
+120 °C

Temperature max.
+100 °C

Temperature min.
-40 °C

Tube
Synthetic rubber
Förpackningsstorlek
1 m

Streckkod
376983

Bruttovikt
0,46 Kg

Nettovikt
0,46 Kg

Ursprungsland
ITA

Intrastat artikelkod
40092100

Hydraulic hose for conveying fluids in hydraulic and lubrication circuits. The hose is built with a synthetic rubber inner tube and cover, reinforced with 1 layer high tensile steel wire braid for pressure capability and stable hose structure.

The 3/4" hose size with 19 mm inner diameter and 27,2 mm outer diameter is a common selection for medium-flow hydraulic lines. A minimum bend radius of 120 mm supports routing in confined installations while maintaining the hose geometry. The hose meets EN 853 1SN, ISO 1436 1SN and SAE 100R1AT, making it suitable where these hose standards are specified.

Typical Applications
  • Hydraulic lines for oil-based systems
  • Transfer lines for diesel, grease, oil and water media within the specified temperature range