Reduction - 1/2" BSP x 1 BSP female - WD seal
Thread reducer for adapting between two different BSPP thread sizes in hydraulic and fluid power systems. The connection has a G 1/2 male thread on one side and a G 1 female thread on the other, allowing a larger female port to be connected to a smaller male thread size.
Sealing is via a WD profile sealing ring in NBR, supporting a defined seal at the threaded interface. The steel body is zinc-nickel plated and rated for pressures up to 400 bar, with an operating temperature range from -35 °C to +100 °C.
Typical Applications
- Reducing BSPP port size when connecting hydraulic components with different thread sizes
- Adapting lines and ports in hydraulic and fluid transfer assemblies where a WD sealing interface is required
Varenummer:
RI-12-1ED
Pakke str.:
10 pcs
Min. bestillingsenhed er:
1 pcs
D2
12 mm
Gevind indvendig
G 1 BSP
Gevind udvendig
G 1/2 BSP
Korrosions resistens
1200 hours salt spray DIN EN ISO 9227
L1
49 mm
L2
24,5 mm
Længde
49 mm
Materiale
Steel
Model kode
FI-RED-R1/2-WD-R1-B-W3
Mærke navn
Stauff
Overfladebehandling
Zinc-Nickel plated
Pakningsmateriale
NBR
REACH compliant
Yes
RoHs compliant
Yes
S1
41 mm
Sekskant
41 mm
Sikkerhedsfaktor
4
Temperatur maks.
+100 °C
Temperatur min.
-35 °C
Thread T1
G 1/2 BSP
Thread T2
G 1 BSP
Totallængde
49 mm
Tryk maks.
400 bar
Type
Long
Vinkel
0 °
i
14 mm
Package size
10 pcs
Barcode
130489
Gross weight
0,22 Kg
Net weight
0,22 Kg
Country of origin
DEU
Intrastat code
73071110
Thread reducer for adapting between two different BSPP thread sizes in hydraulic and fluid power systems. The connection has a G 1/2 male thread on one side and a G 1 female thread on the other, allowing a larger female port to be connected to a smaller male thread size.
Sealing is via a WD profile sealing ring in NBR, supporting a defined seal at the threaded interface. The steel body is zinc-nickel plated and rated for pressures up to 400 bar, with an operating temperature range from -35 °C to +100 °C.
Typical Applications
- Reducing BSPP port size when connecting hydraulic components with different thread sizes
- Adapting lines and ports in hydraulic and fluid transfer assemblies where a WD sealing interface is required
Note: Opening 3D files requires a program that supports the file format
Copyright © 2026 HydraSpecma