Rev. counter PPC04/12 With 3 mtr cable

The Sensor-PPC-04/12-SDS-CAB rotational speed sensor allow non-contact speed measurement of rotating components. The sensor is based on an opto-electrical measurement principle that determines the rotational speed with high accuracy using a reflecting strip on the shaft.

The contact rotational speed measurement is achieved by using a contact adaptor attached to the sensor, which touches the rotating component during the measurement process. This method ensures highly accurate results. For particularly small areas, a focusing adaptor can be used to facilitate the measurement.

 

Note:

  • The analogue rotational speed sensor can only be used with analogue dataloggers

 

  • It’s not recommended to extend the sensor beyond the 2-meter permanent cable connection provided with the sensor.

 

 

Artikelnummer:
PPC-04/12-SDS-CAB

Förpackningsstorlek:
1 st

Minsta beställningskvantitet:
1 st
Kabellængde
3 m

Mærke navn
Stauff

Rotationshastighed maks.
10000 rpm

Rotationshastighed min.
20 rpm

Sensor type
SR

Temperatur omgivelse maks.
+85 °C

Temperatur omgivelse min.
-25 °C

Udgangssignal maks.
3 V

Udgangssignal min.
0 V
Pakke str.
1 st

Stregkode
240268

Brutto vægt
0,22 Kg

Netto vægt
0,22 Kg

Oprindelsesland
DEU

Intrastat varekode
90261021

The Sensor-PPC-04/12-SDS-CAB rotational speed sensor allow non-contact speed measurement of rotating components. The sensor is based on an opto-electrical measurement principle that determines the rotational speed with high accuracy using a reflecting strip on the shaft.

The contact rotational speed measurement is achieved by using a contact adaptor attached to the sensor, which touches the rotating component during the measurement process. This method ensures highly accurate results. For particularly small areas, a focusing adaptor can be used to facilitate the measurement.

 

Note:

  • The analogue rotational speed sensor can only be used with analogue dataloggers

 

  • It’s not recommended to extend the sensor beyond the 2-meter permanent cable connection provided with the sensor.