1/2" Hose burst cartridge valve
Hose burst cartridge valve for preventing uncontrolled movement of an actuator if a hose or line fails. The valve closes automatically when the flow exceeds the set reaction flow, helping to hold the load when a hose rupture occurs.
The cartridge is installed in a valve cavity and connects with a G 1/2 BSP port. Key selection parameters include the nominal flow capacity, maximum operating pressure, and the recommended oil viscosity used for the specified flow performance.
Typical Applications
- Actuator supply/return lines where uncontrolled motion must be limited in case of hose rupture
- Load-holding protection in hydraulic circuits with risk of line failure
Partnumber:
VUBA-12
Package size:
1 pcs
Min. order quantity is:
1 pcs
Brand Name
OM Oleodinamica Marchesini
Flow max.
80 lpm
Flow rate nominal LMin
80 lpm
L
13 mm
L1
29 mm
L2
5 mm
L3
33 mm
L4
43 mm
Material
Steel
Oil viscocity recommended
30 cSt
Pressure max.
350 bar
S
1,6 mm
Thread
G 1/2 BSP
V
G 1/2 BSP
V1
1/2 BSP
ØC
15 mm
ØD
12,5 mm
ØF
19 mm
Package size
1 pcs
Barcode
241998
Gross weight
Kg
Net weight
Kg
Country of origin
ITA
Intrastat code
84812010
Hose burst cartridge valve for preventing uncontrolled movement of an actuator if a hose or line fails. The valve closes automatically when the flow exceeds the set reaction flow, helping to hold the load when a hose rupture occurs.
The cartridge is installed in a valve cavity and connects with a G 1/2 BSP port. Key selection parameters include the nominal flow capacity, maximum operating pressure, and the recommended oil viscosity used for the specified flow performance.
Typical Applications
- Actuator supply/return lines where uncontrolled motion must be limited in case of hose rupture
- Load-holding protection in hydraulic circuits with risk of line failure
Copyright © 2026 HydraSpecma