Check valve 3/8 100-200 bar
Line mounted poppet type check valve with adjustable cracking pressure. Flow is always allowed to pass from port A to port B when pressure at A rises above the spring bias pressure and the poppet is pushed from the seat.
The spring load is adjustable by turning the internal ring nut with a insex wrench: screwing down increases the spring load and increases the cracking pressure (in order to turn the Ring Nut, loosen first the little locking screw with a insex wrench; tighten it again once the spring load is adjusted).
The valve is normally closed (checked) from B to A.
Varenummer:
LCA10/150
Pakke str.:
0 pcs
Min. bestillingsenhed er:
1 pcs
Flow Nominel LMin
30 lpm
Gjenger
G 3/8 BSP
Merke navn
Hydraspecma
Temperatur maks.
+100 °C
Temperatur min.
-20 °C
Trykk maks.
350 bar
Trykkindstilling maks.
200 bar
Tykkindstilling min.
100 bar
Pakke str.
0 pcs
Stregkode
5704295872520
Brutto vægt
0,23 Kg
Netto vægt
0,23 Kg
Oprindelsesland
ITA
Intrastat varekode
84812010
Line mounted poppet type check valve with adjustable cracking pressure. Flow is always allowed to pass from port A to port B when pressure at A rises above the spring bias pressure and the poppet is pushed from the seat.
The spring load is adjustable by turning the internal ring nut with a insex wrench: screwing down increases the spring load and increases the cracking pressure (in order to turn the Ring Nut, loosen first the little locking screw with a insex wrench; tighten it again once the spring load is adjusted).
The valve is normally closed (checked) from B to A.
Copyright © 2026 HydraSpecma