Bulkhead elbow, 45°
45° bulkhead elbow for connecting two JIC male (37° flared) interfaces while passing through a bulkhead or panel. The 45° angle helps route tubing where a straight fitting would not provide sufficient clearance.
The fitting is specified with a 1.5/8-12 JIC outer thread on both ends and is intended for tube size 32 mm. Electro-galvanized / white chromatized surface treatment and a corrosion resistance of 1400 hours salt spray (DIN EN ISO 9227) are specified for use in demanding environments. Maximum working pressure is 240 bar.
Typical Applications
- Hydraulic tube routing through bulkheads, tanks, guards, or machine panels
- JIC tube connections where a 45° change of direction is required
Partnumber:
JVSV-20
Package size:
1 pcs
Min. order quantity is:
1 pcs
Angle
45 °
B
40,5 mm
Brand Name
FOR
C
67 mm
CH
50 mm
Corrosion resistance
1400 hours salt spray DIN EN ISO 9227
D
44 mm
Diameter pipe
32 mm
J
1.5/8-12 JIC
J1
1.5/8-12 JIC
Material
Steel
Pressure max.
240 bar
Surface treatment
Electro-galvanized / White chromatized
T
32 mm
T1
32 mm
Thread outer
1.5/8-12 JIC
Package size
1 pcs
Barcode
144290
Gross weight
0,92 Kg
Net weight
0,92 Kg
Country of origin
ITA
Intrastat code
73071110
45° bulkhead elbow for connecting two JIC male (37° flared) interfaces while passing through a bulkhead or panel. The 45° angle helps route tubing where a straight fitting would not provide sufficient clearance.
The fitting is specified with a 1.5/8-12 JIC outer thread on both ends and is intended for tube size 32 mm. Electro-galvanized / white chromatized surface treatment and a corrosion resistance of 1400 hours salt spray (DIN EN ISO 9227) are specified for use in demanding environments. Maximum working pressure is 240 bar.
Typical Applications
- Hydraulic tube routing through bulkheads, tanks, guards, or machine panels
- JIC tube connections where a 45° change of direction is required
Note: Opening 3D files requires a program that supports the file format
Copyright © 2026 HydraSpecma