S690-12-45G elbow with nut
45° elbow adapter for hydraulic lines with JIC female swivel on one side and JIC male on the other. The 45° bend is used to route tubing/hoses where space or hose/tube alignment requires an angled connection.
Both ends use JIC 3/4-16 (37° flare) interfaces, providing a consistent connection size through the elbow. The swivel nut on the female side supports assembly in confined layouts by allowing the nut to rotate during tightening while the elbow body remains positioned.
Typical Applications
- Angled connections between JIC hydraulic tubes/hoses and components where a 45° change of direction is required
- Hydraulic pipework layouts where access and orientation benefit from a swivel female connection
Varenummer:
JEVV-08-ST
Pakkestr.:
1 pcs
Min. bestillingsmengde er:
1 pcs
Angle
45 °
B
25 mm
Brand Name
FOR
C
32 mm
CH
22 mm
Corrosion resistance
1400 hours salt spray DIN EN ISO 9227
Diameter pipe
12 mm
J
3/4-16 JIC
Material
Steel
Pressure max.
350 bar
Surface treatment
Electro-galvanized / White chromatized
T
12 mm
Thread inner
3/4-16 JIC
Thread outer
3/4-16 JIC
Pakke str.
1 pcs
Stregkode
233327
Brutto vægt
0,09 Kg
Netto vægt
0,09 Kg
Oprindelsesland
ITA
Intrastat varekode
73071110
45° elbow adapter for hydraulic lines with JIC female swivel on one side and JIC male on the other. The 45° bend is used to route tubing/hoses where space or hose/tube alignment requires an angled connection.
Both ends use JIC 3/4-16 (37° flare) interfaces, providing a consistent connection size through the elbow. The swivel nut on the female side supports assembly in confined layouts by allowing the nut to rotate during tightening while the elbow body remains positioned.
Typical Applications
- Angled connections between JIC hydraulic tubes/hoses and components where a 45° change of direction is required
- Hydraulic pipework layouts where access and orientation benefit from a swivel female connection
Bemærk: Åbning af 3D-filer kræver et program der understøtter fil-formatet
Copyright © 2026 HydraSpecma