1/4" Shuttle valve
Shuttle valve for selecting between two independent pressure lines and passing the higher-pressure signal to a common outlet. This function is typically used to combine or prioritize pressure signals in a hydraulic circuit without back-feeding the lower-pressure line.
The valve has BSPP ports in size G 1/4 with port identification P for the two inlet lines and U for the selected outlet line. Zinc-plated surface treatment and NBR sealing material are specified for this item.
Typical Applications
- Selection of the higher of two pressure signals to a common control or pilot line
- Hydraulic circuits where two pressure sources must be combined into one signal line
Partnumber:
VU2P-14
Package size:
1 pcs
Min. order quantity is:
1 pcs
Brand Name
OM Oleodinamica Marchesini
Flow max.
30 lpm
Flow rate nominal LMin
30 lpm
H
40 mm
L
60 mm
L1
104 mm
L2
9 mm
L3
44 mm
Material
Steel
Oil Temperature Recommended
50 °C
Oil viscocity recommended
30 cSt
P
1/4 BSP
Pressure max.
350 bar
S
30 mm
Sealing material
NBR
Surface treatment
Zinc-plated
Temperature max.
+100 °C
Temperature min.
-20 °C
Thread
G 1/4 BSP
U
1/4 BSP
ØD
8,5 mm
Package size
1 pcs
Barcode
5704334776734
Gross weight
Kg
Net weight
Kg
Country of origin
ITA
Intrastat code
84812010
Shuttle valve for selecting between two independent pressure lines and passing the higher-pressure signal to a common outlet. This function is typically used to combine or prioritize pressure signals in a hydraulic circuit without back-feeding the lower-pressure line.
The valve has BSPP ports in size G 1/4 with port identification P for the two inlet lines and U for the selected outlet line. Zinc-plated surface treatment and NBR sealing material are specified for this item.
Typical Applications
- Selection of the higher of two pressure signals to a common control or pilot line
- Hydraulic circuits where two pressure sources must be combined into one signal line
Copyright © 2026 HydraSpecma