Stud fitting - ø12L indv x M16x1.5 - o-ring seal
Stud fitting for connecting a 12 mm hydraulic tube connection in L series to a metric male thread with an O-ring sealing interface. Used to adapt between a tube fitting side and a threaded port connection in hydraulic pipework.
The L-series tube side defines the connection for 12 mm outside diameter tube. The threaded side uses M16x1.5. The O-ring seal in NBR provides the sealing function at the threaded interface. Zinc-nickel surface treatment and a corrosion resistance of 1200 hours salt spray (DIN EN ISO 9227) are specified for the part.
Typical Applications
- Hydraulic tube installations where a 12 mm L-series tube connection must be adapted to a metric threaded port
- Pipework assembly and service where an O-ring sealed stud connection is required
Partnumber:
VA12MLDKO
Package size:
0 pcs
Min. order quantity is:
1 pcs
Angle
0 °
Brand Name
Gates
Corrosion resistance
1200 hours salt spray DIN EN ISO 9227
Diameter pipe
12 mm
Material
Steel
Model code
FI-EGED-12LM-WD-BV-W3-DKO
Pressure max.
500 bar
REACH compliant
Yes
RoHs compliant
Yes
Safety factor
4
Sealing material
NBR
Series
L
Surface treatment
Zinc-Nickel plated
Temperature max.
+100 °C
Temperature min.
-35 °C
Thread inner metric
M18x1,5
Thread outer metric
M16x1,5
Package size
0 pcs
Barcode
5704295284064
Gross weight
0,09 Kg
Net weight
0,09 Kg
Country of origin
DEU
Intrastat code
73071110
Stud fitting for connecting a 12 mm hydraulic tube connection in L series to a metric male thread with an O-ring sealing interface. Used to adapt between a tube fitting side and a threaded port connection in hydraulic pipework.
The L-series tube side defines the connection for 12 mm outside diameter tube. The threaded side uses M16x1.5. The O-ring seal in NBR provides the sealing function at the threaded interface. Zinc-nickel surface treatment and a corrosion resistance of 1200 hours salt spray (DIN EN ISO 9227) are specified for the part.
Typical Applications
- Hydraulic tube installations where a 12 mm L-series tube connection must be adapted to a metric threaded port
- Pipework assembly and service where an O-ring sealed stud connection is required
Copyright © 2026 HydraSpecma