5/8" Hydraulic hose SPT-210CH - 2SC WP 350 bar

Hydraulic hose designed to transfer pressure media in hydraulic systems, with a 5/8" size and a 2-layer high tensile steel wire braid reinforcement for pressure capability.

Constructed with an NBR (nitrile) inner tube and a synthetic rubber cover. The hose is specified for use with diesel, oil, and grease, and supports tight routing with a minimum bend radius of 90 mm.

Typical Applications
  • Hydraulic lines for diesel, oil, and grease in pressure systems
  • Hose installations where a compact bend radius is required

Artikelnummer:
SPT210CH

Förpackningsstorlek:
0 m

Minsta beställningskvantitet:
1 m
Användingsområde
Diesel, Grease, Oil

Armering
2 layer high tensile steel wire braid

Bestillingsenhed
Single hose

Böjningsradie
90 mm

Diameter inv.
16 mm

Diameter utv.
23.6 mm

Flamresistent
Yes

Innertub
NBR (Nitrile)

Märke namn
Hydraspecma

REACH compliant
Yes

RoHs compliant
Yes

Slangdimension
5/8 "

Slangtyp
2SC

Standard EN
EN 857 2SC

Standard ISO
ISO 11237 2SC

Temperatur intermittent max.
+135 °C

Temperatur max.
+120 °C

Temperatur min.
-40 °C

Tryck max.
350 bar

Tryck spräng min.
1400 bar

Yttertub
Synthetic rubber
Förpackningsstorlek
0 m

Streckkod
5704334721376

Bruttovikt
0,28 Kg

Nettovikt
0,28 Kg

Ursprungsland
ROU

Intrastat artikelkod
40092100

Hydraulic hose designed to transfer pressure media in hydraulic systems, with a 5/8" size and a 2-layer high tensile steel wire braid reinforcement for pressure capability.

Constructed with an NBR (nitrile) inner tube and a synthetic rubber cover. The hose is specified for use with diesel, oil, and grease, and supports tight routing with a minimum bend radius of 90 mm.

Typical Applications
  • Hydraulic lines for diesel, oil, and grease in pressure systems
  • Hose installations where a compact bend radius is required