1/4" Hydraulic hose SPT-204CH - 2SC WP 430 bar
Hydraulic hose for conveying hydraulic media in high-pressure systems, built to EN 857 2SC and ISO 11237 2SC. The hose construction with a nitrile (NBR) inner tube and two high-tensile steel wire braid reinforcement is intended for demanding hydraulic installations where pressure capability and flexibility are key selection factors.
The synthetic rubber cover supports use in environments where the hose is exposed externally, and the specified bend radius helps when routing in compact assemblies. Supplied by the metre for hose assembly to the required length.
Typical Applications
- Hydraulic lines for oil-based fluids in compact high-pressure hydraulic systems
- Hydraulic lines for diesel, oil and grease transfer in hydraulic service and maintenance setups
Varenummer:
SPT204CH
Pakkestr.:
0 m
Min. bestillingsmengde er:
1 m
Bruksområde
Diesel, Grease, Oil
Bøyningsradius
50 mm
Cover
Synthetic rubber
Diameter innvendig
6.4 mm
Diameter utvendig
13.3 mm
Flammebestandig
Yes
Inderrør
NBR (Nitrile)
Merke navn
Hydraspecma
Modell kode
SPT-204-CH
OrderUnit
Single hose
REACH compliant
Yes
Reinforment
2 layer high tensile steel wire braid
RoHs compliant
Yes
Slange godkjenninger
ABS, BV, CCS, DNV, KR, LLOYD, MED, NKK, RINA
Slangestørrelse
1/4 "
Slangetype
2SC
Standard EN
EN 857 2SC
Standard ISO
ISO 11237 2SC
Temperatur intermitterende maks.
+100 °C
Temperatur maks.
+120 °C
Temperatur min.
-40 °C
Trykk maks.
430 bar
Trykk spreng min.
1720 bar
Pakkestr.
0 m
Strekkode
5704334721352
Bruttovekt
0,28 Kg
Nettovekt
0,28 Kg
Opprinnelsesland
ITA
Intrastat produktkode
40092100
Hydraulic hose for conveying hydraulic media in high-pressure systems, built to EN 857 2SC and ISO 11237 2SC. The hose construction with a nitrile (NBR) inner tube and two high-tensile steel wire braid reinforcement is intended for demanding hydraulic installations where pressure capability and flexibility are key selection factors.
The synthetic rubber cover supports use in environments where the hose is exposed externally, and the specified bend radius helps when routing in compact assemblies. Supplied by the metre for hose assembly to the required length.
Typical Applications
- Hydraulic lines for oil-based fluids in compact high-pressure hydraulic systems
- Hydraulic lines for diesel, oil and grease transfer in hydraulic service and maintenance setups
Krympedimensjoner til SPT204CH
|
Slangetype |
Diameter - tommer |
Slangekoblingstype |
Kappe |
Pressmål - mm |
Avskrelling - int. |
Avskrelling - ekst. |
Arbeidstrykk - bar |
|---|---|---|---|---|---|---|---|
| SPT204CH | 1/4 | P04 | P0430 |
16.4 mm
±0.1
|
Nei | Nei | 430 |
| SPT204CH | 1/4 | P04 | P0420 |
15.4 mm
±0.1
|
Nei | Nei | 430 |
Copyright © 2026 HydraSpecma