Reduction - 3/4"BSP x 1/4"BSP female - WD seal
Thread reducer for adapting between two BSPP (G) thread sizes in a hydraulic line or component port. One end has a G 3/4 male thread and the other end has a G 1/4 female thread, allowing a larger connection to be stepped down to a smaller size.
The WD sealing design uses an NBR profile sealing ring to provide the seal at the connection. The fitting has a zinc-nickel plated surface treatment and is specified for a maximum working pressure of 400 bar within a temperature range of -35 to +100 °C.
Typical Applications
- Reducing a BSPP threaded port size on hydraulic manifolds, valves, cylinders, or pumps
- Adapting hydraulic pipework where a G 3/4 connection must interface to a G 1/4 component or measuring point
Varenummer:
RI3/4WD1/4
Pakke str.:
0 pcs
Min. bestillingsenhed er:
1 pcs
Angle
0 °
Brand Name
Stauff
Corrosion resistance
1200 hours salt spray DIN EN ISO 9227
Diameter pipe
0 mm
Hexagon
32 mm
L1
26 mm
L2
12,5 mm
Length
26 mm
Material
Steel
Model code
FI-RED-R3/4-WD-R1/4-B-W3
Pressure max.
400 bar
REACH compliant
Yes
RoHs compliant
Yes
S1
32 mm
Safety factor
4
Sealing material
NBR
Surface treatment
Zinc-Nickel plated
Temperature max.
+100 °C
Temperature min.
-35 °C
Thread T1
G 3/4 BSP
Thread T2
G 1/4 BSP
Thread inner
G 1/4 BSP
Thread outer
G 3/4 BSP
Total length
26 mm
Type
Short
i
16 mm
Package size
0 pcs
Barcode
5704295277486
Gross weight
0,10 Kg
Net weight
0,10 Kg
Country of origin
DEU
Intrastat code
73071110
Thread reducer for adapting between two BSPP (G) thread sizes in a hydraulic line or component port. One end has a G 3/4 male thread and the other end has a G 1/4 female thread, allowing a larger connection to be stepped down to a smaller size.
The WD sealing design uses an NBR profile sealing ring to provide the seal at the connection. The fitting has a zinc-nickel plated surface treatment and is specified for a maximum working pressure of 400 bar within a temperature range of -35 to +100 °C.
Typical Applications
- Reducing a BSPP threaded port size on hydraulic manifolds, valves, cylinders, or pumps
- Adapting hydraulic pipework where a G 3/4 connection must interface to a G 1/4 component or measuring point
Note: Opening 3D files requires a program that supports the file format
Copyright © 2026 HydraSpecma