Stud fitting - ø12L indv x M16x1.5 - o-ring seal
Straight stud fitting for connecting a 12 mm L-series metric tube connection to a male metric thread with O-ring sealing. The fitting uses a 24° cone connection on the tube side and an O-ring at the stud end to seal in the port interface.
Selection is primarily based on tube outside diameter (12 mm, L-series), the external thread size (M16x1,5), and the pressure and temperature limits of the application. Zinc-nickel plated steel construction and an NBR sealing element are specified for this variant.
Typical Applications
- Hydraulic tube-to-port connections where a metric L-series tube interface and a metric parallel-thread stud connection with O-ring sealing are required
- General hydraulic piping and component connections within the specified pressure and temperature limits
Varenummer:
FEGED12LM16WD
Pakke str.:
1 pcs
Min. bestillingsenhed er:
1 pcs
Angle
0 °
Brand Name
Stauff
Corrosion resistance
1200 hours salt spray DIN EN ISO 9227
D1
12 mm
D2
8 mm
Diameter pipe
12 mm
L
30,5 mm
L1
30,5 mm
Material
Steel
Model code
FI-EGED-12LM-WD-BV-W3-DKO
PN
400 bar
Pressure max.
500 bar
REACH compliant
Yes
RoHs compliant
Yes
S
22 mm
S1
22 mm
S2
22 mm
Safety factor
4
Sealing material
NBR
Series
L
Surface treatment
Zinc-Nickel plated
T
M16x1,5
Temperature max.
+100 °C
Temperature min.
-35 °C
Thread inner metric
M18x1,5
Thread outer metric
M16x1,5
d1
M16x1,5
d7
22 mm
i
12 mm
Pakke str.
1 pcs
Stregkode
5704334917984
Brutto vægt
0,09 Kg
Netto vægt
0,09 Kg
Oprindelsesland
DEU
Intrastat varekode
73071110
Straight stud fitting for connecting a 12 mm L-series metric tube connection to a male metric thread with O-ring sealing. The fitting uses a 24° cone connection on the tube side and an O-ring at the stud end to seal in the port interface.
Selection is primarily based on tube outside diameter (12 mm, L-series), the external thread size (M16x1,5), and the pressure and temperature limits of the application. Zinc-nickel plated steel construction and an NBR sealing element are specified for this variant.
Typical Applications
- Hydraulic tube-to-port connections where a metric L-series tube interface and a metric parallel-thread stud connection with O-ring sealing are required
- General hydraulic piping and component connections within the specified pressure and temperature limits
Copyright © 2026 HydraSpecma