Counter balance 115l/m CP441-1-V-0-E-B-XXX-4.5-015
CP441-1, Hydraulic Vent Valve
Operation
This 3-ported, externally piloted unit is a 12-size cartridge style, low leakage counterbalance valve with hydraulic vent. The check section allows free flow from the directional valve (port 2) to the load (port 1), while normally blocking flow from port 1 to port 2. Reverse flow is blocked until pilot pressure is applied at port 3. When the load pressure at port 1 rises above the pressure setting, the integral relief valve is activated, and pressure is relieved from port 1 to port 2.
Applications
Single counterbalance valves are normally used when the load is unidirectional, such as aerial lifts, cranes, or winches. In load holding applications, they can be used as hose-break valves when installed near or within an actuator. Dual valves can be used for controlling loads bi-directionally in motor applications, or for cylinders going over center.
Partnumber:
132786
Package size:
0 pcs
Min. order quantity is:
1 pcs
Flödeshastighet nominell LMin
115 lpm
Föroreningsgrad max.
20/18/14 - ISO 4406
Kavitet
CP12-3S
Modell kod
CP441-1-V-0-E-B-XXX-4.5-015
Märke namn
Danfoss
Oljeviskositet rekommanderad
12 - 54 cSt
Pilot förhållande
4,5:1
Tryck max.
350 bar
Tryckinställning max.
103 bar
Tryckinställning min.
103 bar
Åtdragning moment
68 - 75 Nm
Package size
0 pcs
Barcode
5704334410584
Gross weight
0,63 Kg
Net weight
0,63 Kg
Country of origin
Intrastat code
84812010
CP441-1, Hydraulic Vent Valve
Operation
This 3-ported, externally piloted unit is a 12-size cartridge style, low leakage counterbalance valve with hydraulic vent. The check section allows free flow from the directional valve (port 2) to the load (port 1), while normally blocking flow from port 1 to port 2. Reverse flow is blocked until pilot pressure is applied at port 3. When the load pressure at port 1 rises above the pressure setting, the integral relief valve is activated, and pressure is relieved from port 1 to port 2.
Applications
Single counterbalance valves are normally used when the load is unidirectional, such as aerial lifts, cranes, or winches. In load holding applications, they can be used as hose-break valves when installed near or within an actuator. Dual valves can be used for controlling loads bi-directionally in motor applications, or for cylinders going over center.
Copyright © 2026 HydraSpecma