IMP/VAPORE/6-B.B. White cover 25 x 7
Areas of use:
- steam
- hot water
Characteristics: Are used for steam when cleaning in food-industry. Also usable as hot water hose. When using with steam, these hoses must only be used with open hose end. Maximum pressures and temperatures - see below. Steam are dangerous. HydraSpecma A/S has published a short guidance (no.9), regarding selecting of steam hoses.
Construction: Mandrel-built hose with reinforcemetns af synthetic yarns.
Material: Inside and outside from heat-, weather and Oszone-resistant EPDM-rubber. Also resistant to normal claningfluids and unorganic acids and bases in max. 5% koncentration. White color inside and outside.
Couplings: Coupling for steam should always be with ferrules of 2-part type in brass or steel, and are mounted with 2- or 4 bolts. Inserts in steel threaded connections or flanges. Couplings type SMS and SVS. SMS and SVS not availabe for all dimensions.
Working ranges:
Hot water hose: Max. temp. 90°C., max. working pressure 13 bar, burst pressure 54 bar.
Low pressure steam hose: Max. temp. 160°C., max. working pressure 6 bar.
Artikelnummer:
0114058025
Förpackningsstorlek:
40 m
Minsta beställningskvantitet:
40 m
Bend radius
150 mm
Color
White
Diameter inner
25 mm
Diameter outer
39 mm
Förpackningsstorlek
40 m
Streckkod
5704295525846
Bruttovikt
0,87 Kg
Nettovikt
0,87 Kg
Ursprungsland
Intrastat artikelkod
40093100
Areas of use:
- steam
- hot water
Characteristics: Are used for steam when cleaning in food-industry. Also usable as hot water hose. When using with steam, these hoses must only be used with open hose end. Maximum pressures and temperatures - see below. Steam are dangerous. HydraSpecma A/S has published a short guidance (no.9), regarding selecting of steam hoses.
Construction: Mandrel-built hose with reinforcemetns af synthetic yarns.
Material: Inside and outside from heat-, weather and Oszone-resistant EPDM-rubber. Also resistant to normal claningfluids and unorganic acids and bases in max. 5% koncentration. White color inside and outside.
Couplings: Coupling for steam should always be with ferrules of 2-part type in brass or steel, and are mounted with 2- or 4 bolts. Inserts in steel threaded connections or flanges. Couplings type SMS and SVS. SMS and SVS not availabe for all dimensions.
Working ranges:
Hot water hose: Max. temp. 90°C., max. working pressure 13 bar, burst pressure 54 bar.
Low pressure steam hose: Max. temp. 160°C., max. working pressure 6 bar.
Copyright © 2025 HydraSpecma