Gear flow divider Vivoil RV0 (8 items)

Flowdivider of gear wheel type from factory Vivoil. Divides inlet oil in two or more equal flows. May also be used as pressure amplifiers.

RV*D: Standard flow divider. (NB: An external pressure limiter should be mounted on each of the flowdividers oulet ports).

RV*S: Flow divider with single phase correction valve.

RV*V: Flow divider with phase correction and anti-cavitation valves.

Flowdividers with external drain should always be mounted below the oil level in the hydraulic oil reservoir.

To achieve best functioning, the manufacturer recommends following values to be obtained:

Temperature range: Environment: -10°C to +60°C. Oil: +30°C to +60°C.

Viscosity: 20 to 40 cSt.

Filtration: 10 to 25my.

Partnumber:
Package size:
1 PCS
Min. order quantity is:
1 PCS
Flow divider 2x0,57cm3
Partnumber:
Package size:
1 PCS
Min. order quantity is:
1 PCS
Flow divider 2x0,98cm3
Partnumber:
Package size:
1 PCS
Min. order quantity is:
1 PCS
Flowdivider 6x1,27cm3 3/8 BSP  In-out
Partnumber:
Package size:
1 PCS
Min. order quantity is:
1 PCS
Flow divider 2x2,3 cm3         with 1 valve
Partnumber:
Package size:
1 PCS
Min. order quantity is:
1 PCS
Flow divider 2x0,57cm3+valve   with valves(35-175 bar)
Partnumber:
Package size:
1 PCS
Min. order quantity is:
1 PCS
Flow divider 2x0,98cm3+valve   with valves(35-175 bar)
Partnumber:
Package size:
1 PCS
Min. order quantity is:
1 PCS
Flow divider 4x0,57cm3+valve   with valves(70-350 bar)
Partnumber:
Package size:
2 PCS
Min. order quantity is:
1 PCS
Flow divider 4x0,98cm3+valve   with valves(35-175 bar)